Antenna Co-ax Cable Connectors
SmoothTalker low-loss Radio Frequency Cable Connectors

Antenna Coaxial Cable Connectors

Smooth Talker low-loss co-ax cable connectors are available in three different configurations:

"Barrel Type" - These connectors are used to connect antennas with existing connectors that do not match the connector on the device into which they are to connect to. These connectors are threaded on both ends and easy to use, however they will add a small amount of "line-loss".

"Crimp Type" - Crimp connectors are used as replacements to damaged antenna connectors, or when a new connector is required on a coax cable. They are installed onto a coax cable and require soldering and a special "coax crimp" tool. Crimp connectors eliminate the requirement for "barrel connectors" and as such the lowest amount of "line-loss" is achieved.

"Compression Type" - Compression connectors are used on large diameter "low-loss" coax cable. They require soldering of the tip, but they do not require a special "crimp tool."