Stealth M2M X6 4G LTE Booster Kit
Note: Does not support Sprint bands 26 (lower 800MHz) and band 41 (2500 MHz)
THIS IS A CONSUMER DEVICE
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
All SmoothTalker BTUX615M1481i kits include
|2017-06-20||manual||User Manual (Canada)||1.0||Download|
Stealth M2M signal boosters are are the most powerful M2M boosters on the market. They will keep your cellular data device connected further away from the tower than any other direct connect M2M booster. Designed to be directly connected to cellular data modems, tracking devices, monitoring devices and other cellular data devices. Stealth M2M are self monitoring to ensure signal reliability and increase data speed.
How it works:
The Booster captures the signal outside the building and boosts it to the device. It takes the weak signal from your device and boosts it back to the tower. Boosts both voice and data simultaneously.
Where can this booster be used:
BOOST CELLULAR Applications within the following categories
How Large an Area will it Cover:
Coverage area is effected by two things. Outside signal and booster gain. Generally the booster will cover the whole space in a car or pick up truck. In the case where it is used in a boat or RV the range will be limited by the outside signal level.
Assessing your outside cellular signal level
How Far from the Tower
Stealth M2M X6 15dB is the most powerful wireless booster on the market and can keep you connected up to 35 mi/60 km . from the nearest tower.
Use Signal Bar Indicator
Use the signal bar indicator on your cellular device to approximate signal strength as per the chart above.
Note: Even if your device shows no bars or "no service" it is possible that there is enough cellular signal for a booster to achieve communication with the network.
TIPS ON SET UP
STEALTHTECH TECHNOLOGY (proprietary Smoothtalker technology):
Stealth M2M X6 15dB amplifiers and boosters use STEALTH TECH® to automatically control gain to eliminate feedback loop (oscillation) and strong signal overload from nearby towers. This will keep your booster working without unexpected shutdowns and at maximum efficiency.